<aside> 📽️ Quick video how to flash using QMK Toolbox.

</aside>

Zoom 65 V3 Flashing.mp4

  1. Download QMK Toolbox in Github repository.

Releases · qmk/qmk_toolbox

  1. Open QMK Toolbox as administrator.

image.png

  1. If you have a pop up to install drivers, install them first. If you don’t click Tools then Install Drivers. A terminal will open then wait for it to automatically close then restart your computer.

image.png

image.png

  1. Go to https://zoom65v3.meletrix.com/connect then connect your keyboard. Place the Reset keycode on the 1 key.

image.png

  1. Unplug your keyboard.
  2. Open QMK Toolbox with Administrator permissions again.

image.png

  1. Once the program is opened, hold the 1 key then insert the USB cable. This will put the keyboard in DFU mode and can be confirmed with this yellow text.

image.png

  1. Click Open then select the proper firmware file. It should be a .bin file.

image.png

image.png

  1. Once you have imported the firmware file it will show up on the local file of QMK Toolbox.

image.png

  1. Click Flash then wait for the flashing process to finish.

image.png

  1. Once you see Flash complete in the terminal you have successfully finished flashing your PCB.

image.png